SOURIS OPTIQUE SANS FIL RECHARGEABLE #F8E845UK - Wireless Mouse BELKIN - Free user manual and instructions

Product type	Rechargeable wireless optical mouse
Brand	Belkin
Model	F8E845UK
Detection technology	Optical
Interface	USB or PS/2 (adapter included)
Wireless range	Up to 1.8 meters
Number of buttons	5 (left, right, scroll wheel, 2 programmable side buttons)
Scroll wheel	Yes, with fast/auto scroll function
Power source	2 rechargeable NiMH batteries (included)
Charger	Charging cradle (mains connection via AC adapter)
Initial charging time	10 to 12 hours
Software included	CD-ROM with drivers for button customization
Supported operating systems	Windows 98 SE, Me, 2000, XP
Dimensions (approx.)	110 x 60 x 35 mm
Weight (with batteries)	Approximately 100 g
Radio frequency	27 MHz (wireless)
Certifications	FCC Class B, IC, NMB-003
Package contents	Mouse, receiver/dock, 2 NiMH batteries, PS/2 adapter, CD-ROM, manual
Maintenance	Clean with a soft, dry cloth. Do not use abrasive products.
Warranty	Limited lifetime warranty (excluding batteries)

Frequently Asked Questions - SOURIS OPTIQUE SANS FIL RECHARGEABLE #F8E845UK BELKIN

How to sync the mouse with the receiver?

If syncing does not happen automatically, press the Connect button on the front of the receiver (the indicator flashes), then press the sync button under the mouse. The indicator stops flashing and stays lit.

What to do if the mouse does not respond?

Check that the batteries are correctly inserted (respect polarity). Make sure the receiver is properly plugged in and at least 20 cm away from other electrical devices. Try syncing again.

How to charge the mouse?

Place the mouse in the charging cradle. The cradle must be plugged into a mains outlet via the provided AC adapter. Use only the included NiMH rechargeable batteries. The first charge takes 10 to 12 hours.

Does the mouse work on all surfaces?

The optical mouse works on most surfaces, but may have difficulty on reflective surfaces (mirror, glass) or halftone printed surfaces. Use a mouse pad if necessary.

Can I use the mouse without installing the software?

Yes, the mouse works as a standard mouse without the software. However, installing the software is recommended to program the extra buttons and customize functions.

How to install the mouse in PS/2 mode?

Turn off the computer. Connect the USB-PS/2 adapter to the receiver cable, then insert it into the PS/2 port. Insert the batteries into the mouse. Turn on the computer; it will automatically detect the mouse.

The pointer moves jerkily, why?

This may be due to an unsuitable surface (glass, mirror) or low light. Try on a mouse pad or matte surface. Also check that the batteries are adequately charged.

How to uninstall old mouse drivers?

Before installing the new mouse, remove all drivers and software of previous mice via Control Panel > Add/Remove Programs. Consult the old mouse documentation for the exact procedure.

The scroll wheel does not work on my laptop?

Make sure you have disabled the touchpad or trackpoint in the BIOS, and enable the external port. Also verify that the mouse software is installed.

Where to find Belkin customer service?

Belkin Tech Support Europe: 00 800 223 55 460. Address: 5 Rue du Petit Robinson, 3rd floor, 78350 Jouy-en-Josas, France. Website: www.belkin.com.

USER MANUAL SOURIS OPTIQUE SANS FIL RECHARGEABLE #F8E845UK BELKIN

Rechargeable Wireless Optical Mouse

BELKIN

www.belkin.com

Belkin Ltd.

Express Business Park • Shipton Way

Rushden • NN10 6GL • United Kingdom

Tel: [phone]

Fax: [phone]

Belkin B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk • The Netherlands

Tel: [phone]

Fax: [phone]

Belkin GmbH

Hanebergstrasse 2

80637 Munich · Germany

Tel: [phone]

Fax: [phone]

Belkin SAS

© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

BELKIN

Rechargeable Wireless Optical Mouse

Navigate, input data, and charge for advanced wireless functionality

User Manual

F8E845ea

EN 1

FR 17

DE 33

NL 49

ES 65

IT 81

F8E845ea

BELKIN

Rechargeable Wireless Optical Mouse

Navigate, input data, and charge for advanced wireless functionality

EN

FR

DE

NL

ES

IT

User Manual

F8E845ea

Table of Contents

1 Introduction 3
System Requirements 4
Packaging Includes 4
Overview. 4
2 Hardware Installation 5
Connecting the USB Mouse 6
Connecting the PS/2 Mouse. 7
Synchronizing your Mouse to your Receiver . . . .8
3 Software Installation 9
Software Features 10
Button Functions 10
Charging. 10
4 Troubleshooting 11
5 Information. 14

Introduction

Congratulations and thank you for purchasing the Rechargeable Wireless Optical Mouse from Belkin. You are about to experience a whole new world of computing convenience with superior input features and navigating accuracy. The Mouse works from up to six feet away without a cord, giving you unencumbered freedom of movement. It provides five customizable buttons, including the convenient scroll wheel, to make repetitive tasks simpler than ever.

Please review this User Manual thoroughly to ensure your safe, long-term use of the Mouse, and for help in getting the most from its advanced features.

1

System Requirements

• Windows® 98 SE, Me, 2000, or XP
• CD-ROM drive
  5MB of available disk space
  USB or PS/2 port

2
3
4
5

Packaging Includes

Rechargeable Wireless Optical Mouse
- Charging Cradle
- Software CD
- User Manual
2 NiMH Batteries
PS/2 Adapter

Overview

Before starting the installation of the hardware and software for the Mouse, please remove any drivers or software from any mice that were previously installed on your computer. This is to avoid any conflicts they may create, which could result in an improper installation of your Mouse. Please consult the documents that came with your previous mouse for proper instructions on how to uninstall the software and drivers.

Hardware Installation

Important: Before connecting your Mouse or installing software, be sure to identify the type of mouse port you are using (USB or PS/2). Refer to the diagrams below if you have difficulty determining which kind of port your Mouse uses.

USB Port

PS/2 Port

1
2
3
4
5

Important: Do not install the software until the Mouse is connected to your computer. If you have not yet connected the Mouse, please follow the Hardware Installation instructions.

Note: Your Mouse is functional without installing the software provided. However, we recommend software installation because the software allows you to program the Mouse buttons for various functions, adding personalized efficiency and enjoyment to your computing experience.

Hardware Installation

Connecting the USB Mouse

USB in Windows 98 SE, Me, 2000, and XP

1. Make sure your computer is turned on before installing the Mouse.
2. Connect the receiver to an available USB port on your computer.
3. A New Hardware Wizard will start automatically. Note: Windows 98 SE may require you to insert your Windows 98 SE Installation CD into your computer's CD-ROM drive to complete the install.
4. When your Installation is complete, insert the batteries into the Mouse and the Mouse should sync up with the receiver automatically. Note: If the Mouse does not sync up with the receiver automatically, please see instructions titled "Synchronizing your Mouse to your Receiver".
5. When your Mouse is properly connected and functioning as a standard mouse, you can start the software installation for the extra button features.

Hardware Installation

Connecting the PS/2 Mouse

PS/2 in Windows 98 SE, Me, 2000, and XP

1. Turn off your computer.
2. Connect the USB-to-PS/2 connector to the mouse cable on the receiver.
3. Insert the cable with the connector to the PS/2 (6-pin) mouse port on your computer.
4. Place the batteries into the Mouse.
5. Turn the computer on.
6. When the computer finishes starting up, it will automatically detect the Mouse and make it function. Note: If the Mouse does not work, please see instructions under "Synchronizing your Mouse to your Receiver".
7. When your Mouse is properly connected, you can start the software installation.

1
2
3
4
5

Synchronizing your Mouse to your Receiver

If the Mouse does not automatically sync with the receiver, press the connect button on the front of the receiver. The light on the receiver will blink rapidly. Then sync the Mouse to the receiver by pushing the sync button on the bottom of the Mouse. The light on the receiver will stop blinking and light brightly.

Note: Each time you repeat this step, the Mouse will randomly select a new ID. This allows multiple wireless mice to work in the same location without cross talk. If you experience cross talk with another wireless mouse, repeat the synchronizing steps to change the channel.

Software Installation

Important: Do not install the software until the Mouse is connected and properly functioning to your computer. If you have not yet connected the Mouse, please follow the Hardware Installation instructions.

1. Insert the included installation CD into your CD-ROM drive. After a few moments, the main menu will start automatically.
2. Select "Install Driver" and the computer will begin installation.
3. Follow the on-screen instructions to complete the installation.

Note: If the computer does not automatically detect the CD, do the following:

1. Click the "Start" button and select "Run".
2. From the run dialog box, enter ":\ Setup" and click "OK". ("" being the letter of the drive that identifies your CD-ROM driver under "My Computer". For example, if the CD is in driver D, enter "D:\Setup".)
3. Follow the on-screen installation instructions.

Software Features

Your Mouse's software enables a variety of exciting features and functions that will help you to increase your productivity with your new Mouse.

In order to control the Mouse's high-end features, you will need to access your Mouse's Properties dialog box, either through the Control Panel or through your Mouse's software.

Through your Mouse's Properties dialog box, you will find and control the following features:

Please note that only the scroll wheel, fourth, and fifth buttons are programmable through the software.

Button Functions

Left Button	Primary Mouse Button (standard click-and-drag action)
Middle or Wheel Button	Quick/Auto Scroll
Right Button	Context Menu
Fourth Button	IE Back (if available)
Fifth Button	IE Forward (if available)

Charging

The receiver/cradle must be connected to an outlet using the included AC cable. Place the Mouse into the base station to charge. Please be sure to use the rechargeable batteries provided. Allow batteries to charge for at least 10 to 12 hours before first using your Mouse.

Troubleshooting

If you are having any problems with the installation or operation of your Mouse, please review the following section. If the problem is not referred to below, or the suggested solutions do not solve the problem, please contact our technical support staff at 00 800 223 55 460.

Why isn't my pointer moving smoothly?

The Mouse works well on a wide variety of surfaces, especially those with textured and/or patterned features. Problems will arise, however, if you attempt to use the Mouse on mirrors, glass, or on some half-tone-printed surfaces.

Why don't the scroll functions work with my notebook?

Check to be sure that you have disabled your notebook's trackball, touch pad, or J-key in the BIOS; then, enable the external port so that all your Mouse's functions will be available.

Troubleshooting

My USB Mouse was not detected by the system and won't work. Why?

Please do the following:

1. Make sure your USB Mouse is completely plugged into the USB port.
2. Check the functioning of your system's USB port in the Device Manager page of System Properties. If there is a circled exclamation point through the USB port's icon, the USB controller has some problem. Please try to uninstall and then reinstall the USB driver, or contact your PC manufacturer's technical support department.
3. Check the version of your operating system. If you are not running Windows 98 SE, Me, 2000, or XP, please update your operating system to one of these, so that the USB device can be enabled.
4. Make sure that the USB port is enabled in the BIOS setup.

Troubleshooting

My Mouse is not responding.

Please do the following:

1. Be sure to install the batteries positioned for correct polarity.
   2.Make sure you have connected the receiver correctly.
2. Make sure the receiver is at least 8 inches (approx. 20cm ) away from other electrical devices such as computers, monitors, and printers.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F8E845

to which this declaration relates,

Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user's authority to operate the equipment.

Canada-Industry Canada (IC)

The wireless radio of this device complies with RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003.

Belkin Corporation Limited Lifetime Product Warranty*

Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.

This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMplied. BELKIN SPECIFICALLY DISCLAIMES ANY AND ALL IMPLIED WARRANTY, INCLUDING, WITHOUT LIMITATION, WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS.

Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

• Batteries not included under warranty.

BELKIN

Rechargeable Wireless Optical Mouse

BELKIN

www.belkin.com

Belkin Ltd.

Express Business Park • Shipton Way

Rushden • NN10 6GL • United Kingdom

Tel: [phone]

Fax: [phone]

Belkin B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk • The Netherlands

Tel: [phone]

Fax: [phone]

Belkin GmbH

Hanebergstrasse 2

80637 Munich · Germany

Tel: [phone]

Fax: [phone]

Belkin SAS

© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.

BELKIN

Souris Optique Sans Fil Rechargeable

My USB Mouse was not detected by the system and won't work. Why?

This Class B digital apparatus complies with Canadian ICES-003.

Express Business Park, Shipton Way

Assistance Technique Belkin

Europe: 00 800 223 55 460

Canada-Industry Canada (IC)

Express Business Park • Shipton Way

Kennisgeving van de Federal Communications Commission (FCC)

Canada - Industry Canada (IC)

Express Business Park • Shipton Way

Express Business Park • Shipton Way

Rushden · NN10 6GL · Reino Unido

Tel: [phone]

Fax: [phone]

Belkin B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk · Holanda

Tel: [phone]

Fax: [phone]

Belkin GmbH

Hanebergstrasse 2

80637 München • Alemania

Tel: [phone]

Fax: [phone]

Belkin SAS

Canada- Industry Canada (IC)

Express Business Park • Shipton Way

Rushden • NN10 6GL • Regno Unito

Tel: [phone]

Fax: [phone]

Belkin B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk · Paesi Bassi

Tel: [phone]

Fax: [phone]

Belkin GmbH

Hanebergstrasse 2